自适应RBF神经网络在CDMA移动通信上行链路功率控制中的应用研究

提出了一种自适应RBF神经网络功率控制方案。详细研究了该网络在DS-CDMA通信中，进行上行链路闭环功率控制(基于信扰比(SIR))的应用理论，给出了该网络参数的计算方法。最后用计算机仿真法模拟出该控制器的运行性能。结果表明基于SIR的自适应RBF神经网络功率控制器能自适应地调整移动台的发射功率，使基站接收信号的信扰比始终非常接近于一个常数，且有比定步长功率控制更小的SIR跟踪误差，从而可以降低接收信号的中断概率、提高信道容量。     

Feedback linearizing control of a fluidized bed reactor

The design of an adaptive nonlinear controller for the control of a fluidized bed reactor is derived by using exact linearization techniques. Reset action and parameter adaptation are used to make more robust the precise compensation of nonlinear terms, which is called for in the linearization technique. A nonlinear antiwindup mechanism is introduced to handle reset windup problem and to provide fast response without large overshoot. Simulation results show that the proposed adaptive controller guarantees good setpoint tracking. The developed estimation algorithm allows accurate estimation of the parameters for which the regressor component is not zero.     

Robustness of VS-MRAC with respect to unmodelled dynamics and external disturbances

A variable structure model reference adaptive controller (VS-MRAC) using only input and output measurements was recently proposed and shown to be globally asymptotically stable with superior transient behaviour and disturbance rejection properties. In this paper a singular perturbation approach is used in order to establish the robustness of the controller in the presence of unmodelled dynamics (parasitics) and disturbances. We develop a new Lyapunov-based technique to analyse the overall system and show that for sufficiently small parasitics the system remains stable and the output error is small in some sense.     

Ԥ���������ز����ʵķ���

本文根据物质平衡原理,对于定容和水驱凝析气藏提出了预测采收率的方法,并提出了凝析气藏的总采收率与干气和凝析油采收率的关系式。     

具有Hammerstein形式的非线性系统广义预测控制

本文提出了具有Ｈａｍｍｅｒｓｔｅｉｎ形式的非线性系统广义预测控制方法，分析了当控制水平等于１时闭环系统的稳定性，同时还提出了使用线性估计器的非线性自适应广义预测控制算法。仿真结果表明了算法的有效性。     

Thermodynamic Analysis of Various Dehumidifying Dryers for Wood

Typical methods of dehumidification of air circulating in the dehumidifying driers (indirect and direct cooler and partial exchange of the air) were analysed. Energy aspect of cooler operation was evaluated. The method for minimization of unit thermal energy consumption in a dehumidifying drier by the optimal selection of the cooler point was also given. Methods of the heat recovery of heat conveyed in a cooler lending to save energy (heat regeneration. expansion and compression of the air, a dehumidifier) were analysed. It was indicated that introduction of dehumidifiers into contemporary wood driers caused significant improvement of energy aspects of their operation     

余热利用系统多目标优化模型及应用

以炭黑生产中的余热利用系统为背景建立了余热利用系统多目标优化规划数学模型;阐述了模型的求解方法;给出了实例分析。     

�¹������������յ���״�뷢չ

吐哈油田在总结国内成功经验的基础上，立足先进适用，配套可靠，相继在鄯善、温米、丘陵三大油田建成了鄯善１０＃、鄯善３０＃、温米５０＃、丘陵１２０＃轻烃回收装置，形成了２１０×１０４ｍ３／ｄ的处理规模。根据吐哈油田天然气的物理性质、压力、外输压力要求，采用低温分离法。在轻烃回收发展过程中，经不断完善和改进，现已形成燃气引擎往复式压缩机；分子筛脱水；多股流冷箱换热；重烃逐级降压闪蒸提馏脱水技术；丙烷制冷；膨胀机制冷；导热油供热；ＤＨＸ工艺；屏蔽液烃泵；分布式集散控制系统和安全联锁控制１０项关键技术。     

Experimental evaluation of a multivariable adaptive nonlinear predictive controller

A new multivariable adaptive nonlinear predictive controller is designed using a general nonlinear input-output model and variable transformations. The controller is similar in form to typical linear predictive controllers can be tuned analogously or by specifying a single parameters for each controlled variable. In addition, the design procedure is computationally efficient. The new controller is compared to a multi-loop proportional-integral (PI) controller with one-way static decoupling and to an adaptive linear predictive controller through tests on a simulated nonlinear distillation column. The new controller performed well in an experimental application to a multicomponent distillation column.     

Low-Power Adaptive Biased Integrated Amplifiers

In this paper the author will present the working principle and the applications of a novel adaptive biasing topology, designed to decrease the stand-by power dissipation without affecting the transient performance of low-power amplifiers. The proposed circuit, whose principle and circuit topology can be implemented both in CMOS and in bipolar standard technologies, gives a biasing current whose value depends on the applied input differential voltage and can be set according to the requested transient performance constraints. The adaptive architecture can be utilized in the design of high-efficient low-power operational amplifiers, for the biasing of both the input stage (where the input source current is dynamically increased) and the output stage (where the output current can be controlled and limited). These amplifiers show a very good behaviour, evaluated in terms of two efficiency factors, if compared with those of other adaptive solutions and class-AB topologies, proposed in the literature. Simulation results and also measurements on a chip prototype, fabricated in a standard CMOS technology, are finally presented.